End Vent Slider Windows in Ottawa
An end vent slider is three windows in one frame: a large fixed pane in the middle and a small sliding vent at each end. You keep one wide, uninterrupted view through the centre and can still open both ends for air. It’s made for the wide opening in a living room or family room.
Your Local Experts — One Call Away (613) 850-7887
How the Three Parts Work
| Part | What it does |
|---|---|
| Left vent | Slides toward the centre to open |
| Centre pane | Fixed. No sash, no meeting rail, just glass from frame to frame |
| Right vent | Same as the left, so you can open one end or both |
A common split is a centre about half the width with a vent about a quarter of the width on each side. We size it to your opening and can make the centre wider if the view matters most.
A Wide Opening: Your Three Options
|
|
End vent slider |
Casement – picture – casement |
Bay or bow |
|---|---|---|---|
|
Look |
One frame, slim lines |
Three units joined |
Projects out from the wall |
|
Airflow |
Both ends slide open |
Both ends crank fully open |
Side units crank open |
|
Air seal |
Not tested as a unit (our sliders: 0.5–0.7) |
Tightest (casements tested at 0.0) |
Best |
|
Opens over a deck or walkway? |
Yes, nothing swings out |
Sashes swing outward |
Sashes swing outward |
|
Cost |
Usually lowest of the three |
Middle |
Highest |
If the wall faces a strong wind, the casement combination seals tighter. If something sits right outside the window, or you want one clean frame, the end vent slider is simpler.
Where It Fits in the House
Living rooms facing the street, where the view is the point
Family rooms and dinettes looking onto the yard
Replacing a big old fixed window, when you’d now like some air through the room
Living With It
The vents slide inside the frame, so a single wide blind or a pair of curtains works without catching on anything. Screens sit only over the two vents; the centre stays clear glass. Furniture can go right up to the wall because nothing opens into the room.
What Our Clients Say
Measure, Then Call
Measure the width of the opening inside the trim and send it with a photo. We’ll tell you how the vents and centre would be divided before we come out to measure properly.
